卫生间防水施工施工做法
Waterproof construction method of toilet
1、地面处理
1. Ground treatment
在进行防水处理之前,一定先找平地面,如果地面不平对防水的效果可能会有影响,也可能造成因防水涂料薄厚不均而导致的开裂渗漏。地漏,墙角,管跟等接缝处要使用高弹性的柔性防水涂刷,因为卫生间的墙与地面之间的接缝处会移位最容易渗水。
Before the waterproof treatment, the ground must be leveled first. If
the ground is uneven, it may have an impact on the waterproof effect, or
it may cause cracks and leakage due to the uneven thickness of the
waterproof coating. The joints of floor drain, wall corner, pipe heel
and so on should be painted with flexible waterproof paint with high
elasticity, because the joints between the wall and the ground of the
toilet will be displaced and easy to seep water.
2、墙面处理
2. Wall treatment
墙面处理上要做大约30cm高的防水涂料,以防积水渗透墙面返潮,如果卫生间有淋浴房应将防水做到180cm,如果有浴缸,与浴缸JDG金属穿线管 不锈钢链板 隔离墩模具 检查井钢模具 流水槽模具 阶梯护坡模具 护坡砖模具 遮板模具 相邻的墙面防水高度应比浴缸高出30cm.
A waterproof coating of about 30cm high shall be made on the wall
surface to prevent the water from seeping into the wall surface and
returning to the damp. If there is a shower room in the toilet, the
waterproof height shall be 180cm. If there is a bathtub, the waterproof
height of the wall adjacent to the bathtub shall be 30cm higher than
that of the bathtub